THE WORKHORSE-HUNTRON 2000 TRACKER The Tracker 2000 provides advanced trouble shooting capabilities to simplify testing of analog and digital components such as op amps, voltage regulators, CMOS, NMOS, TTL, etc. It allows you to analyze the overall health of a solid-state component, while the power to the circuitry you're testing is turned off.

Built-in pulse generator - Lets you thoroughly troubleshoot gate-fired devices such as SCR's, TRIACs and optocouplers Easy-to-view CRT display - Displays analog signatures that help you analyze whether a board or component is good, bad or marginal Powerless testing; power to the circuitry you are testing is turned off - You will avoid an accidental short that could cause further damage to the circuit or components under test

SPECIFICATIONS Test Frequencies : 50/60 Hz; 400 Hz; 2000 Hz and 200 Hz (optional) Functions Range Selection: auto or manual high range lockout Channels: 2 Pulse Generator Level: 0 V to ± 5 V Operating Temperature: + 32° F to 122° F Line Voltage: 100 V AC; 115 V AC and 230 V AC Display: monochrome CRT; 2.8" diagonal Overload Protection: ¼ amp, type AGC internal fuse